The compact arrangement, on-site or off-site maintainability, and inherent reliability make it an ideal gas turbine for the demanding oil and gas industry. The gas turbine has a rugged industrial design that enables high efficiency and excellent emissions performance on a wide range of gaseous and liquid fuels.
SGT-100 gas turbine highlights
With the SGT-100 your plant will benefit from world-class availability in addition to maximum operational flexibility. The standard Dry Low Emissions (DLE) combustion system can operate on both liquid and gaseous fuels with low levels of NOₓ and CO emissions. At the same time, it allows for full load acceptance and shedding with automatic fuel changeover – without affecting turbine operation.
Our SGT-100 gas turbine is available with a Dry Low Emissions (DLE) combustion system, a modern approach that avoids injected diluents and addresses the production of low NOₓ with a proven design. You will benefit from extremely low NOₓ emission levels with both gas and liquid fuels, as this gas turbine offers dual-fuel capability.
With its rugged industrial design and lightweight core engine, the SGT-100 is easy to maintain. You will benefit from minimal downtime and maximum availability thanks to long service intervals combined with rapid core engine exchange capability. An on-site maintenance option is available if you wish. Our industrial gas turbines are characterized by a long service life.
Ingenious design to the core
The SGT-100 features a 10-stage axial flow transonic compressor incorporating the latest aerodynamic technologies. The robust design gives optimized performance over a wide range of operating conditions. For power generation, the single-shaft design has a 2-stage turbine. For mechanical drive, the twin-shaft design has a single compressor turbine stage with a 2-stage free power turbine. The overall design of the gas turbine is uniquely simple.
SGT-100 packages
The health and safety of the operation and maintenance staff are paramount. This is why our SGT-100 packages are designed with a special emphasis on, e.g., walkways and handrails, noise suppression, access doorways, and safety interlocks.
The SGT-100 packages are compact and easy to transport, install and maintain.
The package includes the gas turbine, the gearbox, the driven unit and all fluid modules, mounted on a base frame. The factory-tested and certified fluid system modules come fully wired into the package's control systems.
Comprehensive services to support you
Our comprehensive portfolio of services provides low life cycle cost and optimum performance throughout the turbine’s life cycle: Long Term Programs (LTP), overhaul service, field service, spare parts, service exchange, remote diagnostic service, and modernization and upgrades.
Whether for scheduled service or short-term support, our specialists are there for you, on-site all over the world.
The SGT-100 package is designed for easy maintenance: Large side doors offer easy equipment access and facilitate changing the core engine. When your gas turbine is serviced, you can opt for exchanging the core engine for a replacement or on-site maintenance. The package includes on-site maintenance lifting beams.
Maximum fuel capability with minimum environmental impact
Fuel package
The SGT-100 offers a dual-fuel capability for all applications and can be operated with a range of gaseous and liquid fuels. It is designed to meet your individual operating criteria including reliable starting and changeover between fuels. The automatic changeover from the primary to the secondary fuel can be executed at any load.
The engine has a hydrogen (H2) capability of up to 30 vol% (with DLE burners), or up to 65% (with diffusion burners with unabated NOx emissions).
Technical data
Performance data for simple cycle power generation
*Other fuels on request; automatic changeover from primary to secondary fuel at any load
**NOₓ emissions at 15% O₂ on fuel gas (with DLE)